TEJVONTechnologies Pvt. Ltd.
Back to Insights
Mobile · Computer vision 1 min readJune 2026

The checks that run before the shutter

Our scanner has no capture button. A set of checks decides when the photo is good enough, then takes it.

T

Surendra — Tejvon

Senior Android & BLE Engineer

Our card scanner has no capture button. The app decides when to take the photo, and it only does so when it is confident the result will be readable.

Between 12 and 15 checks run internally around each capture. The ones a user notices are these.

Light. If the card is too dark, the flash turns on by itself. The user does not have to diagnose why a scan came out badly.

Sharpness. The app watches the frame and captures the moment the image is clear. Nobody presses a button, which also removes the small shake a button press causes.

Side. After the front of a card, the app asks for the back. If there is no back, it moves on and starts extraction.

Why go this far? Because on-device OCR is only as good as the image it is given, and a rushed person at an expo will not retake a photo. Every check moves a decision from the user to the app. The user holds the phone over the card, and the app does the rest.

Most of the accuracy we gained came from here, not from the recognition step itself.

Topics

MobileComputer vision

Working on a similar challenge?

Let's discuss the architecture before you build.

BLE system design, OTA reliability, and connected product engineering — this is what TEJVON does every day.

Book a Technical Consultation